Skip to main content
nahor
Card payment
International Shipping
Customer Service
Norwegian website | Contact us
obľúbené
prihlásiť sa

Flexi Rack ETSI, B600xH2200xD800, self sup

Artikelnummer: MP239
Lagernd:
Foss Fiber Optics
exkl. MwSt.

Fiber optic Rack for front mounted equipmen. It is produced in aluminium ensuring low weight and simple transport. It has profiles with slide rails that allows continuous height adjustment of nut and screw when installing equipment. Delivered flat-packed, so that one person can easily carry and mount the rack alone. Flexi Rack ETSI, B600xH2200xD800, self supported.

súvisiace produkty
Cable ladder, rear/side mount, 210 cm

Cable ladder used for fastening cables and tubes to the rack.

FR70800
Cable ladder, rear/side mount, 210 cm

Cable ladder used for fastening cables and tubes to the rack.

MP374
Shelf, ETSI/19", D240 mm

Shelf for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.

MP276
Shelf, ETSI/19", D300 mm

Shelf for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.

MP278
Shelf retractable, 19", D300 mm, 1U

Shelf retractable for network equipment that cannot be screwed directly into data or fiber rack or cabinet. The shelf has holes for better ventilation.

MP530
Spring nut, screw, M6, 100-pack

Screw with spring nut for FR racks. The spring nut can be adjusted continuously height-wise in the rack.

FR777
Bend limiter 180 deg., 1U, 10-pack

Bend limiter for avoiding sharp bends on fiber optic patch cords in rack. Bend diameter 30 mm 

FR70502-10
Bend limiter 180 deg., top turn, 10-pack

Bend limiter for avoiding sharp bends on fiber optic patch cords in rack.

FR70505-10
Routing guide, double, 10-pack

Guide to be placed in the middle of the vertical cord guide to keep the patch cords together.

FR70520-10
Mounting bracket for cable ladder, rear mount, 3-pack

FR70810-3
Mounting profile for cable ladder to frame, side mount

FR70820
Shelf bracket set

Large brackets for sliding equipment onto. Fasten one on each sidewall in the racket.  

MP379
Routing guide w/ tie-wrap base, 10-pack

Routing guide used on fan-out units to avoid that weight creates sharp bends or cord stress, may also be used to separate some patch cords from the rest.

FR70515-10
Cable distributor, w/6 cabinet sleeves

Cable distributor used to separate the fibre-tubes in large cables to terminate them in different fiber optic panels.

FR70600
Bend limiter top of vert. guide

Bend limiter for mounting on the top of the rack. Offload patch cords which must be guided over the top.

FR70550
Sawtooth bracket L 120

Angled bracket for mounting cable ladders and other equipment in racks.

838-120
Adapter bracket, 19"/ETSI, 1U (W=25mm)

1U (W=25 mm)

MP268
Adapter bracket, 19''/ETSI, 21U W=25mm)

21U (W=25 mm)

MP419
Adapter bracket, 19" /ETSI, 4U (W=50mm)

1 pcs. is used on one side of the rack.

MP269

Recently viewed

Cleaning kit, cables, grease

The cleaning kit is very effective for removing grease in optical cables. Each set contains 10 solvent-saturated pads and 10 dry towels.

4415
Cleaning fluid, fibre/connectors, TravelSAFE

For cleaning optical connectors in those cases where the contamination cannot be cleaned with dry cleaning and fiber optical fibres prior to splicing and termination. The cleaning fluid comes in a tight 85 g pump/spray container that can be stored in your existing tool sets without risking spills.

MCC-POC03M
Flexi Rack ETSI, B600xH2200xD800, self sup

Fiber optic Rack for front mounted equipmen. It is produced in aluminium ensuring low weight and simple transport. It has profiles with slide rails that allows continuous height adjustment of nut and screw when installing equipment. Delivered flat-packed, so that one person can easily carry and mount the rack alone. Flexi Rack ETSI, B600xH2200xD800, self supported.

MP239
Buffer tube splitter, Ø1.8, 2.2, 2.5, 3.0, 3.3 mm, Miller

The tool consists of a plier with replaceable knife trays ranging over five different tube dimensions. The knife trays have two knives so that the tubes are split into two halves, which makes it simple to remove the tubes in a safe manner. When splicing and dropping fibre with loose tube it may be beneficial to split the tubes length-wise over a shorter length, a so-called window cut. 

80830002
G4-62.5/OM1 Ultra-Fox Plus, Tactical PUR

Ground tactical cables for use in harsh environments where deployment and retrieval for reuse is required. The fiber optic field cable is suitable for use in the industrial, offshore and aquaculture sectors. OCC field cable, D-series, Fiber type 62./125. OM1

D-004CWST5KM-M
odkazy
jazyk
používateľské menu